TheLucidSTEM‹ Chemistry simulationsChemistry · A Level 9701 · 27 Group 2 (A Level)
9701 A Level Chemistry/ Topic 27 Group 2 (A Level)/ 4 interactive simulations/ drag to rotate 3D scenes

Group 2 trends, made interactive

Four simulations covering Topic 27: a carbonate ion in 3D with each Group 2 cation beside it, showing how a small, highly charged cation drags the electron cloud out of the anion; heating Group 2 carbonates and nitrates with a temperature slider to find when each one finally decomposes; lattice enthalpy set against hydration enthalpy as you move down the group for sulfates and hydroxides; and a solubility bench where sulfuric acid and sodium hydroxide are added to Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ solutions.

1. Polarising the anion 3D · 27.1

A positive ion attracts the electron cloud of a neighbouring anion and pulls it out of shape. A small cation with a 2+ charge has a high charge density and distorts the carbonate ion strongly; a large cation spreads the same charge over more volume and distorts it less. The cation is held at the same distance each time so you can compare the stretch directly.

drag to rotate · wheel to zoom

Group 2 cation

IONIC RADIUS
CHARGE / RADIUS
POLARISING POWER
CARBONATE DECOMPOSES
Exam point: the stronger the polarisation, the more the C-O bond nearest the cation is weakened, so the carbonate breaks down into the oxide and carbon dioxide at a lower temperature. Charge density is charge divided by radius; the trend, not the unit, is what you are asked for.

2. Heating the carbonates and nitrates 2D · 27.1

Heat a sample of each salt in a test tube and pass any gas given off through limewater. Raise the flame temperature and wait for the sample to catch up: the salt does nothing until it passes its own decomposition temperature, and that temperature climbs as you go down the group.

Salt

FLAME TEMPERATURE
SAMPLE TEMPERATURE
DECOMPOSES AT ABOUT
STATUS
LIMEWATER
EQUATION
Carbonates give carbon dioxide, which turns limewater milky. Nitrates give brown nitrogen dioxide and oxygen, which relights a glowing splint. The temperatures are approximate textbook values for strong heating; the order, Mg first and Ba last, is the exam point.

3. Lattice versus hydration 2D · 27.2

To dissolve a solid you pay the lattice enthalpy to pull the ions apart and get back the hydration enthalpies as water surrounds them. The bar above the line is the energy you pay, the bar below is the energy you get back. Whichever falls faster as the cations get bigger decides whether the salt gets more or less soluble.

Anion

Cation

LATTICE ENERGY IN
HYDRATION ENERGY OUT
ENTHALPY OF SOLUTION
SOLUBILITY DOWN THE GROUP
Values in kJ mol−1 are rounded teaching data. The enthalpy of solution is the lattice term plus the sum of the hydration enthalpies; a lower (more negative) value goes with a more soluble salt in the syllabus argument. Hydration of M2+: Mg −1920, Ca −1650, Sr −1480, Ba −1360; OH− −460 each; SO42− −1000.

4. Solubility bench 3D · 27.2

Four test tubes hold solutions of magnesium, calcium, strontium and barium ions. Add dilute sulfuric acid and the heavier the metal the more precipitate you get; add sodium hydroxide and it runs the other way. Each white sphere is a cluster of precipitate settling to the bottom.

drag to rotate · wheel to zoom

Reagent

ADDED
IonProductObservation
Reagents: dilute sulfuric acid or dilute sodium hydroxide, a few drops at a time, shaken. Sulfates: solubility decreases down the group. Hydroxides: solubility increases down the group. Barium sulfate is the standard test for sulfate ions, in the presence of dilute acid.
TheLucidSTEM · Cambridge International A Level Chemistry 9701 · Topic 27 Group 2 (A Level). Every scene runs in the browser; drag to rotate 3D scenes, wheel to zoom. Values are standard textbook data rounded for teaching.

About this lab: Group 2 trends

Four interactive simulations for Cambridge A Level Chemistry 9701 topic 27 Group 2: the polarisation of a carbonate ion by Mg2+, Ca2+, Sr2+ and Ba2+ drawn in 3D with charge density worked out for each cation, a heating test for Group 2 carbonates and nitrates with a temperature slider, limewater and the decomposition equations, an energy-bar comparison of lattice enthalpy and hydration enthalpy that explains why sulfates become less soluble and hydroxides more soluble down the group, and a test-tube bench showing the precipitates formed with dilute sulfuric acid and sodium hydroxide.

Four simulations covering Topic 27: a carbonate ion in 3D with each Group 2 cation beside it, showing how a small, highly charged cation drags the electron cloud out of the anion; heating Group 2 carbonates and nitrates with a temperature slider to find when each one finally decomposes; lattice enthalpy set against hydration enthalpy as you move down the group for sulfates and hydroxides; and a solubility bench where sulfuric acid and sodium hydroxide are added to Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ solutions.

Group 2 trends is a free, browser-based simulation for Cambridge International AS & A Level Chemistry 9701 (topic 27 Group 2). The course is assessed in Paper 1 (Multiple Choice (AS)), Paper 2 (AS Structured), Paper 3 (Advanced Practical), Paper 4 (A Level Structured), Paper 5 (Planning, Analysis, Evaluation). Syllabus for examination in 2025-2027. There are 4 tabs, each a self-contained experiment with its own controls and live readings, and nothing to install: it runs on a laptop, tablet or classroom projector.

Syllabus coverage

Full syllabus map: A Level Chemistry 9701 topic 27.

How to use this simulation

  1. 1. Polarising the anion. A positive ion attracts the electron cloud of a neighbouring anion and pulls it out of shape.
  2. 2. Heating the carbonates and nitrates. Heat a sample of each salt in a test tube and pass any gas given off through limewater.
  3. 3. Lattice versus hydration. To dissolve a solid you pay the lattice enthalpy to pull the ions apart and get back the hydration enthalpies as water...
  4. 4. Solubility bench. Four test tubes hold solutions of magnesium, calcium, strontium and barium ions.
  5. The buttons at the end of the tab strip give the scene the whole window (Full screen, Hide controls) and, on a dark stage, a projector-friendly palette (Light scene). Many scenes also have drag handles: drag them to change the set-up directly.

All simulation labs · A Level Chemistry 9701 · TheLucidSTEM home